Swimming pool owners are always in a dilemma how to close their pool for winter. Summer is gone and the leaves are changing color, there is a chill in the atmosphere and you are worried about how to maintain your pool rid of algae and bacteria. Well, it’s not a serious issue. It can be easily sorted out. You need to drain out the water and dry the pool before closing for winter. There is an alternative method also. To close swimming pool for winter you need to have a pool cover, winterizing fluid and water tubes and plugs for the skimmers. Instead of removing the water, you can drain a little less water and leave the pool half filled. You can always get help from a pool company or pool builder to help you keep your pool safe for winter.

See to it that PH water is maintained at 7.2 to 7.6 and adjust it by using soda ash. Mix chlorine well with water and keep your pump running for eight hours so that the chlorine gets mixed well. This will ensure that algae and other bacteria don’t grow in the pool. Remove all return jet fittings. Disconnect the pump from electric supply. Remove the drain pumps as well as filter units. Keep everything dry. Once you remove the pipes the exposed pipe line should be covered with duct tapes. This will ensure that no dust enters them. Also vacuum the pipes to keep them dry. If you have dive boards, floats and ladder, remove them and keep aside.

There are ‘winterizing’ chemicals available in the market. Buy and use them to keep your pool clean. Make sure one of your winterizing chemicals consists of a SHOCK-type product. Many pool builders feel that water level can vary while leaving the pool closed for winter. If you maintain a high level of water it is good for the pool cover. It is a good idea to take the pressure gauge inside for the winter because water collects in its tube which can freeze and cause breakage.

Another option to keep pool from closing for winter is to heat it in winter. It’s not going to cost you much. Your utility bills can be taken care of if you use solar energy to heat your home and pool. Talk to your pool contractor or builder about this. They can guide you to install solar energy panels in your home. It is very easy to install solar panels. Also join a forum of pool builders and contractors on Facebook or Twitter. You can get the latest updates and also get your doubts cleared by professional who are expert pool contractors.

In order to keep your pool clean and fresh always it is highly essential for you to pay a lot of attention to its maintenance. A swimming pool can really give a luxurious appearance to your house. If you have maintained a deck area or a lounge area near your pool then you can surely organize various parties and functions in that area. If you really want to maintain your pool in the proper manner then it is essential for you to take the help of the specialists. The specialists would be able to tell you about filtration and chemical treatment programs. 

This article would mainly focus on various new techniques that can really help you to maintain your swimming pool.

1. Sanitizing your pool

You must use good chlorine products to sanitize your swimming pool. Chlorine will really help in keeping your swimming pool safe from bacteria attack. You will see that the chlorine products usually come in the form of tablets and sticks which you can add into your filter pump that is located in your swimming pool's distribution system.

2. Ph balance

Maintaining the PH balance of the water in your swimming pool is highly essential. You must keep in mind that the Ph balance of your pool water should be between 7.6 and 7.8. If it is too high then you will see the scale formation in your pool area but if it is too low then water would get corrosive gradually. Chlorine should always be added gradually to the pool water. This will make sure that the proper amount of chlorine is added to the water. 

3. Algae Preventive Products

In order to protect your swimming pool from algae formation it is highly essential for you to use the algae preventive products. The liquid algae product should be poured into the filter pump so that it can be distributed evenly. 

4. Check the quantity of calcium in your pool

It is a known fact that calcium causes cloudiness and corrosion in your pool that is why its level should always be maintained between 150 and 250 ppm. You must hire a professional who can check the calcium level in your pool at least once a year. 

5. Check your filter and pump on a regularly basis

In order to ensure the proper distribution of water you must check your filter and the swimming pool pump on a regular basis. You must replace the diatomaceous earth and sand from the filter. 

Well these are some highly important things that are very essential for the proper maintenance of your pool area.